|
67160 KF-N
User manual
Ceramic glass
induction hob
Contents
3
Contents
Operating Instructions
4
4
6
Safety instructions
Description of the Appliance
Cooking surface layout
Control panel layout
Touch Control sensor fields
Displays
6
6
7
8
8
Residual heat indicator
Operating the appliance
9
Switching the appliance on and off
Setting the heat setting
Switching the double ring cooking zone on and off
Switching the STOP+GO function on and off
Using the automatic warm-up function
Locking/unlocking the control panel
Using the child safety device
Switching the power function on and off
Using the timer
Automatic switch off
9
9
10
10
11
12
13
14
15
18
Tips on Cooking and Frying
19
Cookware
Cookware for induction cooking zones
Tips on energy saving
20
21
22
23
Examples of cooking applications
Cleaning and Care
What to do if …
Disposal
24
25
27
Installation Instructions
Safety instructions
Assembly
28
28
30
35
36
Rating Plate
Guarantee/Customer Service
Service
39
4
Operating Instructions
Operating Instructions
1 Safety instructions
Please comply with these instructions. If you do not, any damage resulting is not
covered by the warranty.
Correct use
• This appliance is not intended for use by children or other persons whose
physical, sensory or mental capabilities or lack of experience and knowledge
prevents them from using the appliance safely without supervision or instruc-
tion by a responsible person to ensure that they can use the appliance safely.
• Do not leave the appliance unattended during operation.
• This appliance should be used only for normal domestic cooking and frying of
food.
• The appliance must not be used as a work surface or as a storage surface.
• Additions or modifications to the appliance are not permitted.
• Do not place or store flammable liquids, highly inflammable materials or fusi-
ble objects (e.g. plastic film, plastic, aluminium) on or near the appliance.
Children’s safety
• Small children must be kept away from the appliance.
• Only let bigger children work on the appliance under supervision.
• To avoid small children and pets unintentionally switching the appliance on,
we recommend activation of the child safety device.
General safety
• The appliance may only be installed and connected by trained, registered
service engineers.
• Built-in appliances may only be used after they have built in to suitable built-
in units and work surfaces that meet standards.
• In the event of faults with the appliance or damage to the glass ceramic
(cracks, scratches or splits), the appliance must be switched off and discon-
nected from the electrical supply, to prevent the possibility of an electric
shock.
• Repairs to the appliance must only be carried out by trained registered service
engineers.
Safety instructions
5
Safety during use
• Remove stickers and film from the glass ceramic.
• There is the risk of burns from the appliance if used carelessly.
• Cables from electrical appliances must not touch the hot surface of the appli-
ance or hot cookware.
• Overheated fats and oils can ignite very quickly. Warning! Fire hazard!
• Switch the cooking zones off after each use.
• Users with implanted pacemakers should keep their upper body at least 30 cm
from induction cooking zones that are switched on.
• Risk of burns! Do not place objects made of metal, such as knives, forks,
spoons and saucepan lids on the cooking surface, as they can get hot.
Safety when cleaning
• For cleaning, the appliance must be switched off and cooled down.
• For safety reasons, the cleaning of the appliance with steam jet or high-pres-
sure cleaning equipment is not permitted.
How to avoid damage to the appliance
• The glass ceramic can be damaged by objects falling onto it.
• The edge of the glass ceramic can be damaged by being knocked by the cook-
ware.
• Cookware made of cast iron, cast aluminium or with damaged bottoms can
scratch the glass ceramic if pushed across the surface.
• Objects that melt and things that boil over can burn onto the glass ceramic
and should be removed straightaway.
• Do not use the cooking zones with empty cookware or without cookware.
• To avoid damaging cookware and glass ceramics, do not allow saucepans or
frying pans to boil dry.
• The ventilation gap of 5mm between the worktop and front of the unit un-
derneath it must not be covered.
6
Description of the Appliance
Description of the Appliance
Cooking surface layout
Induction cooking zone 1400 W
with power function 2500 W
Double ring cooking zone 700/1700 W
Induction cooking zone 2200 W
with power function 3100 W
Control panel
Single cooking zone 1200 W
Heat setting selection
Control panel layout
Power function with
pilot light
Cooking zone indicators
Timer function
Lock
with pilot light
Display
Timer display
STOP+GO
with pilot light
Timer
Connection
double ring cooking zone
with power indicator
On/Off
with power indicator
Description of the Appliance
7
Touch Control sensor fields
The appliance is operated using Touch Control sensor fields. Functions are con-
trolled by touching sensor fields and confirmed by displays and acoustic signals.
Touch the sensor fields from above, without covering other sensor fields.
Sensor field
On / Off
Function
To switch the appliance on and off
Increasing heat setting
Decreasing heat setting
Timer selection
Increase settings
Decrease settings
Timer
Increase settings
Reduce settings
Lock
To increase Timer time
To reduce Timer time
Locking/unlocking the control panel
Power
Switching the power function on and
off
Stop+Go
To switch the Keep Warm setting on/
off
Double ring switch
Switches outside ring
on and off
8
Description of the Appliance
Displays
Display
Description
Cooking zone is switched off
Keep warm setting
Keep warm setting/STOP+GO function
is set
-
Heat settings
Heat setting is set
2 - 6 Heating setting plus
Intermediate heat setting is set
decimal point
Automatic warm up
function
Automatic warm-up function is
activated
Fault
Malfunction has occurred
Pan detection
Cookware is unsuitable or too small or
no cookware has been placed on the
cooking zone
Residual heat
Cooking zone is still hot
Child safety device
Power
Lock/child safety device is engaged
Power function is switched on
Switch off is active.
Automatic switch off
Residual heat indicator
1
3
Warning! Risk of burns from residual heat. After being switched off, the cook-
ing zones need some time to cool down. Look at the residual heat indicator
.
Residual heat can be used for melting and keeping food warm.
The induction cooking zones create the heat required for cooking directly in
the base of the cookware. The glass ceramic is merely heated by the residual
heat of the cookware.
The cooling fan switches itself on and off depending upon the temperature of
the electronics.
Operating the appliance
9
Operating the appliance
3
Use the induction cooking zones with suitable cookware.
Switching the appliance on and off
Control panel
Display
Pilot light
lights up
goes out
Switch on
Switch off
Touch for 2 seconds
Touch for 1 second
/
/ none
3
After switching on, within approx. 10 seconds a heat setting or a function must
be set, otherwise the appliance automatically switches itself off.
Setting the heat setting
Control panel
Display
Increase
Touch
to
to
/
Decrease
Switch off
Touch
Touch and at the same time
3
The keep warm setting lies between
and . It is used to keep food warm.
10 Operating the appliance
Switching the double ring cooking zone on and off
With the double ring cooking zone the heating surface can be matched to the
size of the cookware.
Control panel
for 1-2 seconds
for 1-2 seconds
Pilot light
lights up
goes out
Switch on
Switch off
Touch
Touch
Switching the STOP+GO function on and off
The STOP+GO function simultaneously switches all cooking zones that are
switched on to the keep warm setting and then back to the heat setting that
was previously set.
Control panel
To switch on Touch
Display
To switch off Touch
heat setting that was previously
set (not automatic warm up
function)
3
3
Timer functions are not stopped by STOP+GO.
STOP+GO locks the whole control panel except the sensor field
.
Operating the appliance 11
Using the automatic warm-up function
All cooking zones are equipped with an automatic warm-up function. The auto-
matic warm-up function sets the cooking zone to the highest setting for a cer-
tain period of time and then automatically switches back to the cooking setting
that was originally set.
Step Control panel
Display
1.
2.
3.
4.
Setting the level
/
/
/
Place to one side for a moment
touch
touch in order to set the desired
cooking setting
Æ until
after 3 seconds
/
3
If during the automatic warm up a higher heat setting is selected, e.g. from
Á to Ã, the automatic warm up is adjusted.
The length of time that the automatic warm up function operates depends on
the heat setting selected.
Heat
setting
Length of the automatic
warm up
Length of the automatic
warm up
radiation element [min:sec] induction [min:sec]
v
1
2
2.
3
3.
4
4.
5
5.
6
6.
7
8
9
0:30
1:00
1:40
2:40
4:50
5:30
6:30
8:10
10:10
12:20
2:30
2:30
3:30
4:30
---
0:10
0:10
0:10
1:20
3:10
4:20
5:50
8:10
10:10
10:30
2:00
2:00
2:30
2:50
---
12 Operating the appliance
Locking/unlocking the control panel
The control panel, with the exception of the “On/Off” sensor field, can be locked
at any time in order to prevent the settings being changed e.g. by wiping over
the panel with a cloth.
Control panel
Touch
Display
(for 5 seconds)
previously set heat setting
Switch on
Switch off
Touch
3
When you switch the appliance off, the locking function is automatically
switched off.
Operating the appliance 13
Using the child safety device
The child safety device prevents unintentional use of the appliance.
Switching on the child safety device
Step
Control panel
Display/Signal
Display/Signal
1.
2.
Switch on appliance. (Do not set
a heat setting.)
Touch for 4 seconds
The child safety device is switched on.
Switching off the child safety device
Step
Control panel
1.
Switch on appliance. (Do not set
a heat setting.)
2.
3.
Touch for 4 seconds
Switch appliance off.
lights up
The child safety device is switched off.
3
3
The child safety device can only be switched on and off, if no heat setting is set.
Overriding the child safety device
The child safety device can be switched off in this way for a single cooking ses-
sion; it remains activated afterwards.
Step
Control panel
Switch appliance on
Display/Signal
1.
2.
Touch for 4 seconds
lights up
Until the appliance is next switched off, it can used as normal. After switching
off the appliance, the child safety device is active again.
After overriding the child safety device, a heat setting or a function must be set
within approx. 10 seconds, otherwise the appliance automatically switches itself
off.
14 Operating the appliance
Switching the power function on and off
The power function makes more power available to the induction cooking zones,
e.g. to bring a large quantity of water to the boil quickly.
Control panel
Touch
Display
Switch on
Switch off
Touch
Touch
The power function remains activated for differing periods of time:
Cooking zone
diameter [mm]
Power time [min]
210
145
8
2
3
If the power function has ended, the cooking zones automatically switch back to
the heat setting set previously.
Power Management
The cooking zones of the cooking surface
have a maximum power available to them.
Two cooking zones make up a pair (see fig-
ure).
So that the Power function can always be
carried out, Power Management may re-
duce the power of the other cooking zone
in the pair
Example: heat setting 9 is selected on a
cooking zone. The Power function is
switched on for the cooking zone paired up
with it. The Power function is performed,
but heat setting 9 on one cooking zone and Power function on the other cook-
ing zone of a pair exceeds the maximum output for both. Therefore Power Man-
agement reduces the first cooking zone that was switched on from 9 to 7, for
example, and the display for this cooking zone alternates between 9 and 7 and
then remains on the current maximum of 7. (Whether the display alternates be-
tween 9 and 7 or 9 and 6 or other values, depends on the appliance type and the
size of the cooking zone.)
Operating the appliance 15
Using the timer
Function
Condition
Outcome after the
time has elapsed
Automatic cut-out
Countdown timer
a heat setting is set
acoustic signal
00flashes
Cooking zone switches
off
cooking zones not in use
acoustic signal
00flashes
3
3
If a heat setting is set on this cooking zone in addition to a countdown timer,
the cooking zone is switched off after the time set has elapsed.
If a cooking zone is switched off, the timer function set is also switched off.
Selecting a cooking zone
Step
Control panel
Display
Pilot light of the first
cooking zone flashes
1.
2.
3.
4.
Touch
once
once
once
once
Touch
Touch
Touch
Pilot light of the second
cooking zone flashes
Pilot light of the third
cooking zone flashes
Pilot light of the fourth
cooking zone flashes
3
3
If the pilot light is flashing more slowly, the heat setting can be set or modified.
If other timer functions are set, after a few seconds the shortest remaining time
of all the timer functions is displayed and the corresponding pilot light flashes.
16 Operating the appliance
Setting the time
Step
1.
Control panel
Select
Indicator
cooking zone Pilot light for the cooking zone selected
flashes
2.
Touch or
00to 99 minutes
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Switching off the timer function
Step
1.
Control panel
Indicator
Select
cooking zone Pilot light of cooking zone selected flash-
es faster
Time remaining is displayed
2.
Touch
The time remaining counts backwards to
00.
The pilot light goes out.
The Timer function for the selected cooking zone is switched off.
Changing the time
Step
1.
Control panel
Select
Indicator
cooking zone Pilot light of the selected cooking zone
flashes faster
Time remaining is displayed
2.
Touch or
01to 99 minutes
After a few seconds, the pilot light flashes more slowly.
The time is set.
The time counts down.
Operating the appliance 17
Displaying the time remaining for a cooking zone
Step
1.
Control panel field
Display
Select cooking zone Pilot light of the cooking zone selected
flashes faster
The time remaining is displayed
After a few seconds the pilot light flashes more slowly.
Switching off the acoustic signal
Step
1.
Control panel field
Acoustic signal
Touch
Acoustic signal to acknowledge.
Acoustic signal stops.
18 Operating the appliance
Automatic switch off
Cooking surface
• If after switching on the cooking surface, a heat setting is not set for a cook-
ing zone within approx. 10 seconds, the cooking surface automatically switch-
es itself off.
• If one or more sensor fields are covered by objects (a pan, cloths, etc.) for
longer than approx. 10 seconds, a signal sounds and the cooking surface
switches off automatically.
• If all cooking zones are switched off, the cooking surface automatically
switches itself off after approx. 10 seconds.
Cooking zones
• If one of the cooking zones is not switched off after a certain time, or if the
heat setting is not modified, the relevant cooking zone switches off automati-
cally. is displayed. Before being used again, the cooking zone must be set to
.
Heat setting
v, 1- 2
3- 4
Switches off after
6 hours
5 hours
5
4 hours
6- 9
1.5 hours
Tips on Cooking and Frying 19
Tips on Cooking and Frying
3 Information on acrylamides
According to the latest scientific knowledge, intensive browning of food, espe-
cially in products containing starch, can constitute a health risk due to acryla-
mides. Therefore we recommend cooking at the lowest possible temperatures
and not browning foods too much.
20 Tips on Cooking and Frying
Cookware
• You can recognise good cookware from the bottoms of the pans. The bottom
should be as thick and flat as possible.
• Cookware made of enamelled steel or with aluminium or copper bottoms can
leave discolorations on the glass ceramic surface which are difficult or impos-
sible to remove.
Tips on Cooking and Frying 21
Cookware for induction cooking zones
Cookware material
Cookware material
Suitable
Steel, enamelled steel
Cast iron
yes
yes
Stainless steel
if appropriately labelled by the manufacturer
Aluminium, copper, brass
Glass, ceramic, porcelain
---
---
3
3
Cookware for induction cooking zones is labelled as suitable by the manufacturer.
Suitability test
Cookware is suitable for induction cooking, if …
• ... a little water on an induction cooking zone set to heat setting 9 is heated
within a short time.
• ... a magnet sticks to the bottom of the cookware.
Certain cookware can make noises when being used on induction cooking zones.
These noises are not a fault in the appliance and do not affect operation in any
way.
Bottom of the cookware
The bottom of the cookware should be as thick and flat as possible.
Pan size
Induction cooking zones adapt automatically to the size of the bottom of the
cookware up to a certain point. However the magnetic part of the bottom of the
cookware must have a minimum diameter depending on the size of the cooking
zone.
Diameter of cooking zone
[mm]
Minimum diameter of dish base
[mm]
210
145
180
120
3
The cookware must be placed centrally on the cooking zone.
22 Tips on Cooking and Frying
Tips on energy saving
2
2
Place cookware on the cooking zone before it is switched on.
If possible, always place a lid on the cookware.
Tips on Cooking and Frying 23
Examples of cooking applications
The information given in the following table is for guidance only.
Heat
setting
Cooking-
process
Cooking
time
suitable for
Tips/Hints
0
Residual heat, Off position
Keeping
food warm
V
Keeping cooked foods warm as required
Cover
Hollandaise sauce,
melting butter, chocolate,
gelatine
Melting
5-25 mins.
Stir occasionally
Cook with lid on
1-2
Solidifying Fluffy omelettes, baked eggs 10-40 mins.
Simmering rice and milk-
Add at least twice as
much liquid as rice, stir
milk dishes part way
through cooking
Simmer-
ing on low
heat
based dishes
Heating up ready-cooked
meals
2-3
3-4
25-50 mins.
With vegetables add only
20-45 mins. a little liquid (a few table-
spoons)
Steaming
Braising
Steaming vegetables, fish
braising meat
Use only a little liquid, e.
Steaming potatoes
20-60 mins.
g.: max. ¼ l water for
750 g potatoes
4-5
Boiling
Cooking larger quantities of
food, stews and soups
Up to 3 l liquid plus in-
gredients
60-150 mins.
Frying escalopes, veal cor-
don bleu, cutlets, rissoles,
sausages, liver, roux, eggs,
pancakes, doughnuts
Gentle
Frying
Turn halfway through
cooking
6-7
7-8
9
Steady frying
Hash browns, loin steaks,
steaks, Flädle (pancakes for
garnishing soup)
Heavy
Frying
5-15 mins.
per pan
Turn halfway through
cooking
Boiling
Searing
Deep
Boiling large quantities of water, cooking pasta, searing meat (goulash,
pot roast), deep frying chips
frying
The power function is suitable for heating large quantities of liquid.
24 Cleaning and Care
Cleaning and Care
1
1
Take care! Risk of burns from residual heat.
Warning! Sharp objects and abrasive cleaning materials will damage the appli-
ance. Clean with water and washing up liquid.
1
Warning! Residues from cleaning agents will damage the appliance. Remove
residues with water and washing up liquid.
Cleaning the appliance after each use
1. Wipe the appliance with a damp cloth and a little washing up liquid.
2. Rub the appliance dry using a clean cloth.
Removing deposits
1. Place a scraper on the glass ceramic surface at an angle.
2. Remove residues by sliding the blade over the surface.
3. Wipe the appliance with a damp cloth and a little washing up liquid.
4. Rub the appliance dry using a clean cloth.
Remove
immedi- when the appliance has
Type of dirt
using
ately
cooled down
sugar, food containing sugar
plastics, tin foil
yes
yes
---
---
---
---
---
yes
yes
yes
a scraper*
limescale and water rings
fat splashes
cleaner for glass ceram-
ic or stainless steel*
shiny metallic discolouration
*Scrapers and cleaners for glass ceramic and stainless steel can be purchased in specialized shops
3
3
Remove stubborn residues with a cleaner for glass ceramic or stainless steel.
Scratches or dark stains on the glass ceramic that cannot be removed do not
however affect the functioning of the appliance.
What to do if … 25
What to do if …
Problem
Possible cause
Remedy
The appliance cannot be
More than 10 seconds have
Switch the appliance on again.
switched on or is not operat- passed since the appliance was
ing
switched on
The lock is switched on
Switch off the lock (See the
section “Locking/unlocking the
control panel”)
The child safety device is
switched on
Deactivate child safety device
(See the section “Child safety
device”)
Several sensor fields were
touched at the same time
Only touch one sensor field
Automatic switch off has been Remove any objects (pan,
triggered
cloths, etc.) that are lying on
the control panel. Switch the
appliance on again
STOP+GO is activated
Switching off STOP+GO
The residual heat indicator is The cooking zone was only on If the cooking zone is sup-
not displaying anything for a short time and is there- posed to be hot, call the Cus-
fore not hot
tomer Service Department.
The automatic warm up func- There is still residual heat on
tion is not switching itself on the cooking zone
Let the cooking zone cool
down
The highest heat setting is set The highest heat setting has
the same power as the auto-
matic warm up function
Acoustic signal sounds repeat- One or more sensor fields have Uncover sensor field
edly, appliance switches off
been covered for longer than
10 seconds
Acoustic signal sounds when The control panel is wholly or Remove objects.
appliance is switched off
partly covered by objects.
Acoustic signal sounds and
appliance switches itself on
and then off again; after 5
seconds another acoustic sig-
nal sounds
The On/Off sensor field has
been covered up, e.g. by a
cloth
Do not place any objects on
the control panel
Display is switching between Power management is reduc- See the section “Switching the
two heat settings
ing the power of this cooking power function on and off”
zone
26 What to do if …
Problem
Possible cause
Remedy
flashes
Unsuitable cookware
Use suitable cookware
No cookware on the cooking Place cookware on the cooking
zone zone
The diameter of the bottom of Move onto a smaller cooking
the cookware is too small for zone
the cooking zone
Use suitable cookware
is lit
Overheating protection for the Switch off the cooking zone.
cooking zone has been trig-
gered
Switch the cooking zone on
again
Automatic switch off has been Switch off the cooking zone.
triggered
Switch the cooking zone on
again
and number are displayed Electronics fault
Disconnect the appliance from
the electrical supply for a few
minutes (Take the fuse out of
the house’s wiring system)
If after switching on again,
is displayed again, call the cus-
tomer service department
If you are unable to remedy the problem by following the above sugges-
tions, please contact your local Service Force Centre.
1
3
Warning! Repairs to the appliance are only to be carried out by qualified service
engineers. Considerable danger to the user may result from improper repairs.
If the appliance has been operated incorrectly, the engineer's visit will be
chargeable, even during the warranty period.
|